StonePower chipset drivers and firmware
StonePower chipset drivers and ST-1 firmware, validated per model. Choose your CPU and system, and we show the newest cut first.
Choose your processor and system
Newest chipset driver and firmware for every StonePower CPU
-
Cut
Chipset driver6.10.0
Release notes for 6.10.0
- Sends more background AI tasks to the on-chip AI engine, which keeps the cores free for your main work.
- Adds a balanced power plan tuned for StonePower 6 and 7 in workstations that run all day.
-
Cut
Firmware1.4.0
Release notes for 1.4.0
- Systems with four DDR5 modules train memory faster at first boot and hold DDR5-6400 more reliably.
- Install from your board’s firmware setup screen. The package includes flash tools for Windows and Linux.
- Keep power connected until the update finishes.
Chipset driver or firmware
The chipset driver installs in Windows or Linux. Firmware installs on your ST-1 board from its setup screen. Keep power connected until it finishes.
Fitting a StonePower 7 into an existing board? Install firmware 1.3.2 or later first.
Each release lists a SHA-256 checksum to compare with your file. Older releases are in the full history, newest on top.
Every StonePower driver and firmware cut
The full history, newest release on top. Each cut lists its kind, size, checksum, systems and the processors it was validated on.
Newest release on top
-
Cut
Chipset driver6.10.0
Release notes for 6.10.0
- Sends more background AI tasks to the on-chip AI engine, which keeps the cores free for your main work.
- Adds a balanced power plan tuned for StonePower 6 and 7 in workstations that run all day.
-
Cut
Firmware1.4.0
Release notes for 1.4.0
- Systems with four DDR5 modules train memory faster at first boot and hold DDR5-6400 more reliably.
- Install from your board’s firmware setup screen. The package includes flash tools for Windows and Linux.
- Keep power connected until the update finishes.
-
Cut
Chipset driver6.6.2
Release notes for 6.6.2
- Adds chipset support for StonePower 7.
- Improves USB4 transfer speeds on ST-1 boards that support it.
- Fixes sleep and wake on some boards with two network adapters.
-
Cut
Firmware1.3.2
Release notes for 1.3.2
- Adds support for StonePower 7 on every ST-1 board.
- Install this firmware before you fit a StonePower 7 into an existing board.
-
Cut
Chipset driver6.2.1
Release notes for 6.2.1
- Lets Windows 11 run background AI tasks, such as noise removal and live captions, on the AI engine.
- Fixes USB4 device wake on some ST-1 boards.
- Shortens install time.
-
Cut
Firmware1.3.0
Release notes for 1.3.0
- Improves boost clock behavior under mixed AI and core workloads.
- Includes the processor security fixes from our quarterly review.
Questions about installing a driver or firmware? See Support & FAQ.
Specifications shown are concept values. Performance varies by system configuration, workload and cooling.